Blog

• Get the RTL- SDR dongle. ...
• Remember,if you want to use this software,you will need Microsoft .NET 4.6 at least. ...
• Now,you should download the SDR Software Package. ...
• After downloading it,unzip it into a folder. ...
• In the files that you extracted,you will find a file named install-rtlsdr.bat. ...
• Now is the time to plug your dongle in. ...

• Software-defined radio (SDR) is a radio communication system where components that have been typically implemented in hardware (e.g. mixers, filters, amplifiers, modulators/ demodulators , detectors, etc.) are instead implemented by means of software on a personal computer or embedded system.

• An SDR is essentially an artificial currency instrument used by the IMF, and is built from a basket of important national currencies. The IMF uses SDRs for internal accounting purposes. SDRs are allocated by the IMF to its member countries and are backed by the full faith and credit of the member countries' governments.

RTL-SDR is a very cheap ~$25 USB dongle that can be used as a computer based radio scanner for receiving live radio signals in your area (no internet required). ... The RTL-SDR is also sometimes referred to as RTL2832U, DVB-T SDR, DVB-T dongle, RTL dongle, or the "cheap software defined radio".

What is RTL in RTL-SDR? RTL is short for RTL2832U. The Realtek RTL2832U chipset was a popular choice for digital video broadcast (DVB-T) receivers, whose original purpose was to receive video.

A SDR to handle shortwave bands in HF (2-30MHz) might require more instantaneous dynamic range (more bits) because you have strong signals next to weak ones. Folks have built such things, but they're in small quantities, so they're more expensive.

Software Defined Radio Package (Change log)

This package contains: SDR# (SDRSharp) revision 1831 (2021-11-26) – The best free SDR software for Airspy and RTL-SDR dongles! Airspy drivers. HackRF driver.

An SDR performs significant amounts of signal processing in a general purpose computer, or a reconfigurable piece of digital electronics. The goal of this design is to produce a radio that can receive and transmit a new form of radio protocol just by running new software.

The Software Defined Radio (SDR) is a design paradigm for wireless communications devices. Its creator, Joseph Mitola, defined the term in the early90s as an identifier of a class of radios that could be reprogrammed and reconfigured through software[12].

These applications include the integration of wireless medical devices in a common communication platform for seamless interoperability, and cognitive radio (CR) for body area networks (BANs) and wireless sensor networks (WSNs) for medical environmental surveillance.

For use as an SDR, the built-in DVB-T demodulator is switched off, allowing raw data from the A/D converters to go directly to the computer. It turns out that the chip at the heart of these dongles, the RTL2832U, is very flexible, as explained in the sequel.

Bandwidth is the instantaneous width of frequency content that the SDR receiver can receive. It can be thought of as the width of the SDR's window into the RF spectrum. This is usually in the range of 1 to 10 MHz for entry-level SDR receivers, and in the 20 to 60 MHz range for the more advanced SDR transceivers.

• The default driver assumes you'll just be using the RTL-SDR for watching TV or radio but we want to be able to control it to do much more. Plug in the stick, Windows should automatically install the REALTEK 2832U driver.

• It’s a USB dongle that you plug into your PC, and with the installation of a piece of free software, you have a powerful Software Defined Radio (SDR) that can receive signals from 24MHz right up into the GHz range. We’ve already put together a page on this device (see Realtek SDR for under £20 ), but we’re now adding this dedicated page ...

• We thought that we'd announce that the simple solution to most problems is to reinstall the SDR drivers with Zadig. The latest version of Zadig can be downloaded from zadig.akeo.ie or if you use SDR# then it will already be in your SDR# folder. The process is: Plug in the RTL-SDR.

• Start the SDR Device When you launch CubicSDR, it will pop up a window asking you to select and start your SDR device. Pick the one named Generic RTL2832U OEM :: 00000001 and then click Start.

We define general purpose SDR software as programs that allow the RTL-SDR to work like a normal wideband radio receiver. SDR# (pronounced "SDR Sharp") is the most popular free RTL-SDR compatible software in use at the moment. It is relatively simple to use compared to other SDR software and has a simple set up procedure.

What is RTL-SDR? RTL-SDR is a very cheap ~$25 USB dongle that can be used as a computer based radio scanner for receiving live radio signals in your area (no internet required). Depending on the particular model it could receive frequencies from 500 kHz up to 1.75 GHz.

Studio1 is a non-free commercial SDR receiver with advanced DSP capabilities, and is claimed to have the lowest CPU usage of any general purpose SDR software. Studio1 supports the RTL-SDR through use of an ExtIO.dll module. Studio1 claims that it has a very efficient DSP engine that can run well on older Pentium 4 machines.

GQRX (Mac/Linux) (Free) GQRX is a free simple to use SDR receiver which runs on Linux and Mac systems. It is similar to SDR# in terms of features and simplicity of use. GQRX comes with a standard FFT spectrum and waterfall display and a number of common filter settings.

SDR-Console V3 Beta Now Released: Console Server Now Available. SDR-Console V3 is the latest in the line of the free SDR-Console software packages from developed Simon Brown. ... SDR-Console and the server currently support multiple SDR hardware including the RTL-SDR.Feb 14, 2018

The HDSDR software is a free software defined radio (SDR) application for Windows, typically used by amateur radio enthusiasts. HDSDR has an impressive array of features allowing you to explore a wide variety of RF-related activities.

SDR# (pronounced “SDR Sharp”) is the most popular free RTL-SDR compatible software in use at the moment. It is relatively simple to use compared to other SDR software and has a simple set up procedure. We have a full overview of the installation procedure on our Quick Start Page.

Once Windows 7 is installed on the Virtual Machine, setting up software like SDR# is as simple as going through our quickstart guide. Many things you can do with rtl-sdr require piping the audio from SDR# or another software radio receiver into another program which is used to decode the audio. In Windows this can be achieved with stereo mix.

RTLSDR Scanner is a simple cross platform python based wideband spectrum analyzer for the RTL-SDR. It can scan an arbitrarily large frequency bandwidth. The scanner also has an auto calibration feature which can help find the PPM offset of a dongle.

What is RTL in RTL-SDR? RTL is short for RTL2832U. The Realtek RTL2832U chipset was a popular choice for digital video broadcast (DVB-T) receivers, whose original purpose was to receive video.

There are quite a few ways to calibrate your SDR. Most of them resolve around measuring a signal on a frequency that you precisely know. So you compare the signal on the received frequency with the actually transmitted frequency and with his offset you can correct your SDR. That's it.

Airspy is a line of Popular Software-Defined Radio (SDR) receivers developed to achieve High Performance and Affordable Price using innovative combinations of DSP and RF techniques.

Thanks to Andreas Hornig who has recently released a new program called "CalibrateSDR" (GitHub code) which is designed to accurately determine the frequency offset of an SDR via an IQ recording of a DAB+ station.Dec 29, 2020

What is RTL-SDR? RTL-SDR is a very cheap ~$25 USB dongle that can be used as a computer based radio scanner for receiving live radio signals in your area (no internet required). Depending on the particular model it could receive frequencies from 500 kHz up to 1.75 GHz.

• Some dongles, like our RTL-SDR Blog V3 also utilize the direct sampling mode which can enable reception below 28 MHz. 24 – 1766 MHz (Can be improved to ~13 - 1864 MHz with experimental drivers) As you can see from the table, the Elonics E4000 and Rafael Micro R820T/2 dongles have the greatest frequency range.

• The RTL-SDR Blog V3 is an improved RTL-SDR dongle. RTL-SDR dongles were originally designed for DVB-T HDTV reception, but they were found by hardware hackers to be useful as a general purpose SDR. The standard dongles are okay for DVB-T reception, but are just barely suitable for SDR users/experimenters.

• The RTL-SDR can be used as a wide band radio scanner.

• Some dongles, like our RTL-SDR Blog V3 also utilize the direct sampling mode which can enable reception below 28 MHz. 24 – 1766 MHz (Can be improved to ~13 - 1864 MHz with experimental drivers)

What is RTL in RTL-SDR? RTL is short for RTL2832U. The Realtek RTL2832U chipset was a popular choice for digital video broadcast (DVB-T) receivers, whose original purpose was to receive video. It was discovered that these could be hacked and turned into wideband SDR receivers.

Software-defined radio (SDR) is a radio communication system where components that have been traditionally implemented in hardware (e.g. mixers, filters, amplifiers, modulators/demodulators, detectors, etc.) are instead implemented by means of software on a personal computer or embedded system.

HackRF One works as a sound card of the computer. It processes Digital Signals to Radio waveforms allowing the integration of large-scale communication networks. It is designed to test, develop, improvise, and modify the contemporary Radio Frequency systems.May 25, 2020

The RTL-SDR Blog v3 is arguably the most popular of all the SDR USB dongles on the list. The v3 comes equipped with with a 1PPM TCXO (Temperature Compensated Crystal Oscillators) as the reference oscillator built in to the dongle.Feb 23, 2021

The best place to purchase RTL-SDR V3 dongles is directly from our store at www.rtl-sdr.com/store. Currently, the most common RTL-SDR dongle is the R820T/R820T2 which usually sells for around $20 USD.

Double click on install-rtlsdr.bat from within the extracted folder. This will start a command prompt that will download all the drivers required to make SDRSharp work with RTL-SDR. The command prompt will automatically close after a few seconds when it is done.

ADS-B broadcasts at a frequency of 1090 MHz. It has been discovered by the RTL-SDR community, that the RTL-SDR with R820T tuner has the best sensitivity at this frequency. The E4000 and other tuners perform poorly in comparison. So it is recommended that you obtain an R820T tuner if you want to set up ADS-B decoding with the RTL-SDR.

NESDR Receivers. NESDR (pronounced 'any-ess-dee-are') are ultra-low-cost, wide-band software defined radios--truly affordable radio for everyone! All models in this series are RTL-SDRs--based on the Realtek RTL2832U integrated circuit. All NESDRs have a warranty period of 1 year or greater.

The R820T2 is the tuner chip used on most RTL-SDR dongles. It is also used on the Airspy, a more advanced higher end SDR. All in all, it is a very good tuner chip, but it is mostly limited by the low-bit ADC on the RTL2832U chip in the RTL-SDR.Jan 8, 2021

RTL-SDR is a very cheap ~$25 USB dongle that can be used as a computer based radio scanner for receiving live radio signals in your area (no internet required). Depending on the particular model it could receive frequencies from 500 kHz up to 1.75 GHz.

The RTL2832U is a high-performance DVB-T COFDM demodulator that supports a USB 2.0 interface. The RTL2832U is compatible with NorDig Unified 1.0. 3, D-Book 5.0, and EN300 744 (ETSI Specification). It supports 2K or 8K mode with 6, 7, and 8MHz bandwidth.

• Nooelec NESDR SMArt v4 SDR - Premium RTL-SDR w/ Aluminum Enclosure, 0.5PPM TCXO, SMA Input. RTL2832U & R820T2-Based Nooelec NESDR SMArTee v2 SDR - Premium RTL-SDR w/ Aluminum Enclosure, Bias Tee, 0.5PPM TCXO, SMA Input.

• The NooElec SMART is NooElec’s latest RTL-SDR variant which like ours comes with an SMA coax plug and metal enclosure. RTL-SDR enthusiast and blogger Akos has recently uploaded three new articles. In his first article he discusses what he believes is the differences and advantages of Generic vs Premium branded RTL-SDR dongles.

• NooElec have just released their new NESDR Nano 3 RTL-SDR dongle for $27.95 USD. This is a new iteration in their line of ‘nano’ sized dongles, which are very small and suitable for use on small devices like Raspberry Pi’s and mobile phones.

• They are giving away a total of 50 units: two bundles that come with their SMA RTL-SDR and Ham-It-Up Upconverter, one bundle with a Raspberry Pi and RTL-SDR dongle, three double pack RTL-SDR + antenna bundles, ten double packs of RTL-SDR dongles, ten RTL-SDR + antenna sets, and ten sets of just the RTL-SDR dongle itself.

Inside the new Nooelec SMArt RTL-SDR dongle. The online store Nooelec has recently started selling two new RTL-SDR related products. The first product is a lower cost RTL-SDR dongle with the E4000 tuner ( ebay ). The E4000 tuner was one of the original tuner chips used in RTL-SDR dongles when they were first discovered.

The driver is required to use RTL-SDR compatible SDR software on Windows operating systems. 1. Plug your NESDR into an available USB port 2. Open the 'NESDR Driver Installer', Zadig, by clicking the link above 3. Select 'List All Devices' from the 'Options' menu 4.

The NooElec SMART is NooElec’s latest RTL-SDR variant which like ours comes with an SMA coax plug and metal enclosure. RTL-SDR enthusiast and blogger Akos has recently uploaded three new articles. In his first article he discusses what he believes is the differences and advantages of Generic vs Premium branded RTL-SDR dongles.

NESDRs are compatible with all RTL-SDR software packages The tuner chip will dictate both the frequency capability and sensitivity of the SDR. Please see the product pages for details 'Plus' models contain an ultra-stable TCXO installed as standard and an extended 2 year warranty

KiwiSDR Board and Kit. KiwiSDR is a software-defined radio (SDR) covering shortwave, the longwave & AM broadcast bands, various utility stations, and amateur radio transmissions, world-wide, in the spectrum from 10 kHz to 30 MHz.May 25, 2020

What is RTL-SDR? RTL-SDR is a very cheap ~$25 USB dongle that can be used as a computer based radio scanner for receiving live radio signals in your area (no internet required). Depending on the particular model it could receive frequencies from 500 kHz up to 1.75 GHz.

Computers have revolutionized the ham radio hobby. ... Today, nearly every aspect of the hobby can be done on a computer. Even if you do not yet have an amateur radio call sign, you can use software such as Hamsphere to get started and begin talking to other people around the world.

If you have a shortwave radio receiver of your own, you can use your SDR radio to connect it to your computer and listen in. ... These sites offer a kind of shortwave radio online tuner that you can adjust and listen into in real-time.

Antennas, audio amplifiers and conventional radio hardware are used to process analog signals. Typically, an SDR receiver uses an ADC to change the analog signals from the antenna into digital signals that are processed using software on a general-purpose processor.

Participating members and prescribed holders can buy and sell SDRs in the voluntary market. If required, the IMF can also designate members to buy SDRs from other participants.Aug 5, 2021

• A popular (and cheap) SDR receiver is Digital Video Broadcast (DVB-T) receiver with the Realtek RTL2832U controller and tuner integrated circuit. While their original purpose was to receive video, these are now repurposed to receive radio signals, and have come to be known as RTL-SDR devices.

• Thanks to various contributors for letting us know about the OVI-40, a new open source DIY SDR ham radio transceiver project that is now available for ordering. The OVI-40 appears to be a German project that is based on the mcHF transceiver. It is a standalone SDR transceiver (no PC required) with a frequency range of DC - 75 MHz.

• The best place to purchase RTL-SDR V3 dongles is directly from our store at www.rtl-sdr.com/store. Currently, the most common RTL-SDR dongle is the R820T/R820T2 which usually sells for around $20 USD.

• These signals are transmitted by ham radio enthusiasts for the purpose of making contacts, and determining propagation conditions. This is a good application for an RTL-SDR and Raspberry Pi 3 as it enables cheap monitoring of these signals without the need to tie up a full sized ham radio.

A popular (and cheap) SDR receiver is Digital Video Broadcast (DVB-T) receiver with the Realtek RTL2832U controller and tuner integrated circuit. While their original purpose was to receive video, these are now repurposed to receive radio signals, and have come to be known as RTL-SDR devices.

Thanks to various contributors for letting us know about the OVI-40, a new open source DIY SDR ham radio transceiver project that is now available for ordering. The OVI-40 appears to be a German project that is based on the mcHF transceiver. It is a standalone SDR transceiver (no PC required) with a frequency range of DC - 75 MHz.

These signals are transmitted by ham radio enthusiasts for the purpose of making contacts, and determining propagation conditions. This is a good application for an RTL-SDR and Raspberry Pi 3 as it enables cheap monitoring of these signals without the need to tie up a full sized ham radio.

Scelly writes: RF Output from VCR connected directly to input of my RTL-SDR. The RF output is tuned to channel 22 (487.25 MHz), and as the signal is so wide, my RTL-SDR can only display the luminance data (black and white video) and audio, although not at the same time.

Aerial TV is an Android app that allows you to watch DVB-T TV with an RTL-SDR on a mobile device. We posted about Aerial TV back in April and it was available on the Google Play store back then.Jun 26, 2017

ATSC, or Advanced Television Systems Committee, is the group that decides what over-the-air (and more) TV signals look like.May 11, 2016

DVB-T as a digital transmission delivers data in a series of discrete blocks at the symbol rate. DVB-T is a COFDM transmission technique which includes the use of a Guard Interval. It allows the receiver to cope with strong multipath situations.

• This is an RTL-SDR blog V3 software defined radio receiver with RTL2832U ADC chip, R820T2 tuner, 1PPM TCXO, SMA F connector and aluminium case with passive cooling. Tunes from 500 kHz to 1.7 GHz with up to 3.2 MHz (2.4 MHz stable) of bandwidth.

• Please note RTL-SDR dongles are RX only. Comes with our portable dipole antenna kit. Great for beginners as it allows for terrestrial and satellite reception. Easy to mount outdoors and designed for portable and temporary outside usage. Please do not use outside during poor weather conditions.

• This RTL-SDR Blog unit has a full aluminum USER disassemblable housing, and has had thermal management engineered into it. I do have several of the cheaper SDR's that ive smashed the plastic housings off and have small fans blowing across them and a Raspberry Pi project, they work, poorly.

• THEY ALL DO. A cheap SDR in an ABS plastic cover is basically a tiny oven for that cheap SDR and its components. causing bit errors, driver issues and significantly lowering the lifespan of that unit. This RTL-SDR Blog unit has a full aluminum USER disassemblable housing, and has had thermal management engineered into it.

DVB-T dongles based on the Realtek RTL2832U can be used as a cheap SDR, since the chip allows transferring the raw I/Q samples to the host, which is officially used for DAB/DAB+/FM demodulation. The possibility of this has been discovered by Eric Fry (History and Discovery of RTLSDR).

What is RTL-SDR? RTL-SDR is a very cheap ~$25 USB dongle that can be used as a computer based radio scanner for receiving live radio signals in your area (no internet required). Depending on the particular model it could receive frequencies from 500 kHz up to 1.75 GHz.

If you weren't aware, rtl_tcp is a program that allows you to run your RTL-SDR remotely, and connect to it over a network connection. The result is a tremendous performance improvement in rtl_tcp according to Stephen.Aug 31, 2020

The SoapySDR project is an open-source generalized API and runtime library for interfacing with SDR devices. With SoapySDR, you can instantiate, configure, and stream with an SDR device in a variety of environments.

RTLAMR: An RTL-SDR Receiver for 900MHz ISM Smart Meters

Smart meters are meters that monitor electricity usage and wirelessly transmit consumption data to the electricity company. They are a part of the “smart grid”, and allow for better electricity control and usage reporting.Dec 27, 2019

• RTL-SDR Direct Sampling Mode. The RTL-SDR software defined radio can be told to run in a mode called “direct sampling mode”, which with a small hardware mod allows the dongle to tune to the HF frequencies where ham radio and many other interesting signals are found. This means that no upconverter circuit is required.

• The RTL dongles support multiple sampling rates. You should simply try – for example, 2 MS/s should work with most dongles. Share Improve this answer Follow edited Aug 11 '16 at 20:08

• So if you need to increase the observed bandwidth, you need to increase the sampling rate at the dongle! They are identical for complex sampling, like the direct-conversion receiver that the RTL dongle is does. For real-valued sampling, your bandwidth is half the sampling rate.

• There are now many other software defined radios better than the RTL-SDR, but they all come at a higher price. Currently we think that the Airspy ($169) and SDRPlay ($99) SDR's are the best low cost RX only SDR's. There is also the HackRF ($300USD) which can both transmit and receive.

Software defined radio is a type of RF system that utilizes software to perform tasks traditionally performed by hardware, such as generating or decoding baseband signals.Feb 2, 2017

What is RTL in RTL-SDR? RTL is short for RTL2832U. The Realtek RTL2832U chipset was a popular choice for digital video broadcast (DVB-T) receivers, whose original purpose was to receive video. It was discovered that these could be hacked and turned into wideband SDR receivers.

HackRF One is a Software Defined Radio (SDR) peripheral capable of transmission or reception of radio signals from 1 MHz to 6 GHz, designed to enable test and development of modern and next-generation radio technologies. ... It is designed to test, develop, improvise, and modify the contemporary Radio Frequency systems.May 25, 2020

High Dynamic Range (HDR) is the next generation of color clarity and realism in images and videos. Ideal for media that require high contrast or mix light and shadows, HDR preserves the clarity better than Standard Dynamic Range (SDR).

One SDR is currently worth about $1.42.Apr 6, 2021

• Remote SDR V2 is software that allows you to easily remotely access either a PlutoSDR, HackRF or RTL-SDR software defined radio.

• Scelly writes: RF Output from VCR connected directly to input of my RTL-SDR. The RF output is tuned to channel 22 (487.25 MHz), and as the signal is so wide, my RTL-SDR can only display the luminance data (black and white video) and audio, although not at the same time.

• The TVSharp plugin for SDR# can be used to decode these signals, however as the bandwidth of PAL/NTSC signals is much larger than the 2.4 MHz provided by the RTL-SDR, only a black and white image can be received. Scelly writes: RF Output from VCR connected directly to input of my RTL-SDR.

• The SDR is the Arinst SDR Dreamkit, a Russian made portable receive only SDR that will have a 16-bit ADC, 1 - 3100 MHz tuning range, up to 5 MHz instantaneous bandwidth, and have very fast processing which can scan the spectrum at 20 GHz per second. It also comes with a built in 3.9" touchscreen and loudspeaker.

The Nooelec NESDR Nano 3 is probably the coolest RTL-SDR receiver on the whole list. It is TINY! Like, “where's the rest of my SDR?!?” tiny. And it comes packed with a 0.5 PPM TCXO for top of the line performance!Feb 23, 2021

The KiwiSDR is a software-defined radio that attaches to a Seeed BeagleBone Green (BBG) embedded computer. ... The Kiwi is different from other SDRs. It is a standalone device that attaches to your local network and is optionally accessed through the Internet. A browser is used to connect to the user interface.

– modifying radio devices easily and cost-effectively has become business critical. Software defined radio (SDR) technology brings the flexibility, cost efficiency and power to drive communications forward, with wide-reaching benefits realized by service providers and product developers through to end users.

• What is RTL-SDR? RTL-SDR is a very cheap ~$25 USB dongle that can be used as a computer based radio scanner for receiving live radio signals in your area (no internet required). Depending on the particular model it could receive frequencies from 500 kHz up to 1.75 GHz.

• RTL-SDR Supported Frequency Ranges Tuner Frequency Range Elonics E4000 52 – 1100 MHz / 1250 - 2200 MHz Rafael Micro R820T (2) 24 – 1766 MHz Fitipower FC0013 22 – 1100 MHz Fitipower FC0012 22 - 948.6 MHz 1 more rows ...

What is RTL-SDR. The RTL-SDR is an ultra cheap software defined radio based on DVB-T TV tuners with RTL2832U chips.Feb 9, 2021